How to Fix “Your Windows 10 PC Did Not Start Correctly” Error

How to Fix “Your Windows 10 PC Did Not Start Correctly” Error:

It’s not that dangerous when Windows failshey boot on your computer on the first try. This can be a sign of trouble if this happens repeatedly. A “Your PC did not start correctly” error on your screen indicates a problem with specific startup files and configurations.

This complication can result from file system corruption, power outages, virus infections, or a buggy driver and software. You can easily resolve the error and prevent it from happening again. Try the troubleshooting steps highlighted below, and let us know which step fixes the error.

restart your computer

When Windows displays this error, you will find two options on the screen: restart and advanced options. Some users report that restarting their computer solved the problem. press restart button and wait for your PC to come back on.

If Windows still doesn’t boot into the sign-in screen, try the following troubleshooting methods.

boot in safe mode

Booting in Safe Mode can eliminate problems preventing your Windows PC from starting up correctly. When you get this error, shut down your PC, enter Safe Mode, re-boot your PC normally and check if the problem is resolved. refer to comprehensive guide Booting in Safe Mode on Windows To find out how it is below.

Run Startup Repair Tool

Windows has a built-in tool to diagnose and fix problems that prevent the operating system from booting up properly. The Startup Repair tool rests inside the Advanced Startup Options menu.

  1. Click advanced options Error message displays on a blue screen.

An alternative route is to boot your PC into the Advanced Options menu. Adjustment > Updates and Security > health benefit and click restart now button under advanced startup section.

On some Windows 10 devices, you can access the advanced options menu by repeatedly pressing the F11 key as soon as you press the power button. Restarting your PC three times in a row is another way to forcefully trigger the automatic startup options. Choose troubleshoot problems choose more advanced options To continue.

  1. Choose startup Repair.

The tool will quickly diagnose your computer and fix problems preventing Windows from booting up correctly. Startup Repair Tool will also check your computer disk errors and try to fix them. This may take a few minutes or hours, so make sure your PC is connected to a power source.

run system file checker

If there is a problem with some system files, your PC may face difficulties loading Windows. use system file checker To repair or re-download missing and corrupt system files.

  1. Click advanced options on the error screen.
  1. Choose command prompt.
  1. type or paste DISM.exe /Online /Cleanup-Image /RestoreHealth press more in terminal recorded.

The command will trigger the Deployment Image Servicing and Management (DISM) tool to scan and download the necessary system files for your computer to boot up properly.

  1. Next, paste sfc / scannow press more in terminal recorded.

This command scans your PC for missing or corrupt system files and replaces them with a stable copy downloaded by the DISM tool.

  1. Restart your computer when the scan is complete. Paste it shutdown /r press more in command prompt terminal recorded.

restore system

As mentioned earlier, installing a buggy program can mess with your PC’s startup files and configuration. If you see this error right after installing a driver or app, roll back your computer to a previous state where things were working smoothly with the help of Restore Point.

Windows automatically creates a restore point once every week when System protection is enabled on your computer. Windows also makes these points before important system changes such as installing a driver or Windows update to a driver. To fix this startup-related error, follow the steps below to perform System Restore.

  1. Choose advanced options on the error page.
  2. Choose system Restore and click next To move forward.
  1. If you have multiple administrator accounts on your PC, you may need to select the account you want to restore and enter the account’s password.
  2. Select the most recent restore point – make sure you check the “Date & Time” column. Or, select the restore point that was captured before installing the problematic app/driver and click next.
  1. click if you want scan for affected programs To see the apps that the System Restore tool will remove from your computer.
  2. Confirm your selection and click Finish To start the System Restore operation.

Windows will take your PC back in time and hopefully eliminate the problem causing the “Your PC did not start correctly” error.

pay attention: After a system restore, Windows keeps your personal files safe but removes installed apps, drivers, and updates once the restore point is created.

Uninstall or delete recent updates

Did you notice this error after installing Windows Update? We recommend removing the update from your computer.

  1. go towards Adjustment > Updates and Security > Windows Update choose more view Update history.
  1. Choose uninstall updates.
  1. Select the update and click on Uninstall to proceed. Make sure you check the “Installed On” column to confirm the installation date of the update in question.

Repair Windows Boot Configuration Data

Boot Configuration Data (BCD) is a set of data used by Microsoft to boot your Windows computer. If the files that make up the BCD are corrupt or missing, your PC may fail to load Windows. Follow the steps below to rebuild your computer’s BCD.

  1. Click advanced options on the error screen.
  1. Choose command prompt.
  1. type or paste bootrec / fixumbr press more in terminal recorded. When you see “Operation Completed Successfully”, proceed to the next step. message.
  1. type or paste bootrec /fixboot and press recorded.
  2. type or paste bootrec / rebuildbcd and press recorded. These commands will scan your Windows installation and fix any problems it finds.
  1. If the command identifies a Windows installation, type u or a and press recorded To add the installation to your boot list.
  2. Lastly, paste shutdown /r in command prompt terminal press more recorded To restart your PC.

Reset Windows Master Boot Record (MBR)

Master Boot Record (MBR) There is a sector on the hard drive that points your PC to the location of the Windows OS. If the MBR becomes damaged or corrupted, your computer will display messages such as “Error loading operating system,” “Invalid partition table,” “Your PC did not start correctly,” etc.

Restoring the MBR to its factory configuration may fix this problem. To do this follow the steps given below.

  1. Choose advanced options on the error page.
  2. Choose command prompt.
  3. type or paste command prompt in terminal bootrec / fixumbr and press recorded.

This command diagnoses and repairs corruption-related issues detected in the master boot record sector.

  1. Afterwards, paste bootrec /fixboot press more in terminal recorded.

This command will scan for damaged sectors in the MBR and fix them accordingly.

  1. Lastly, paste bootrec / rebuildbcd in console and press recorded.
    The command above will recreate the Boot Configuration Data (BCD) store—a set of required startup files.

Last resort: reset your computer

If Windows still won’t boot properly despite all your troubleshooting efforts, consider resetting your PC to factory defaults. Windows will reinstall the OS, remove third-party apps, and revert all system settings to their defaults. use this Guide on doing factory reset Windows 10 To know more about this extreme move.