How to Disable Secure Boot on Windows 10:
Most modern PCs have a feature called Secure Boot. The purpose of this feature is to prevent your computer from booting with unsigned firmware such as drivers and even operating systems. this feature Protects your computer from malware And other such dangers.
However, at times you may want to disable Secure Boot. This is easy to do on most computers.
What exactly is Secure Boot on Windows 10?
Secure Boot is a feature on your Windows 10 PC that prevents your computer from booting with non-trusted devices. These devices are those that Microsoft has not yet approved and digitally signed.
For example, if you create bootable linux drive, that drive is not signed by Microsoft. Secure Boot will prevent your computer from booting to that drive, therefore keeping your PC safe and secure.
Why Disable Secure Boot on Windows 10
You have to disable secure boot if you want boot your computer from untrusted devices. For example, if you want Install Linux on Your PC, and you need to boot from a bootable Linux drive, you must first disable Secure Boot.
Other reasons to disable Secure Boot include the need to: install some graphics cards or other hardware device.
How to Disable Secure Boot on Windows 10
On Windows 10, you can disable Secure Boot from the UEFI Firmware Settings menu (BIOS).
Before you turn this feature off, know that you may need to reset your PC to activate it again.
With that said, let’s start the Secure Boot Disable process:
- open to start Menu on your Windows 10 PC.
- in the lower-left corner of start Select Menu, Power icon.
- press and hold slip away key on your keyboard and select restart Power icon in the menu.
- Wait for a menu to appear on your screen. When it’s done, choose troubleshoot problems Out of it.
- On the following screen, select advanced options.
- from advanced options select screen UEFI Firmware Settings the option.
- Confirm your action by selecting restart on the following screen.
- Your PC should boot into the BIOS.
- On the BIOS screen, choose Security tab at the top. This tab may have a different name depending on the manufacturer of your PC. it can say bot, certification, or something similar, but you get the idea.
- Below Security (or similar) tab, select secure boot the option.
- On the secure boot screen, secure boot position should say active. This means that the option is currently enabled on your PC.
- To disable Secure Boot, select secure boot control option and then select Disabled from menu.
- Now you need to save your settings and exit the BIOS. To do this, find the F10 key next to safe and out on the right panel. Press this key to save your changes and exit the BIOS.
- a save exit setup signal appears. Choose Yes To continue in this prompt.
- Your PC should reboot.
And that’s all there is to it. Secure Boot should now be disabled, and you can proceed to boot your PC from different bootable drives.
How to Enable Secure Boot on Windows 10
If you’re done and you want to re-enable Secure Boot, Go to the same BIOS screen to turn off the feature.
A few things to know before trying to re-enable Secure Boot:
- If you have installed any graphics cards, hardware devices, or operating systems that are incompatible with Secure Boot, remove them before disabling Secure Boot.
- If for some reason Secure Boot does not reactivate, follow the troubleshooting procedure below.
To re-enable Secure Boot:
- open to start Select Menu and the Power icon.
- hold down slip away key and select restart Power icon from the menu.
- On the screen that comes up, navigate to troubleshoot problems > advanced options > UEFI Firmware Settings > restart.
- Your PC must be in BIOS mode.
- In BIOS, select Security tab at the top.
- Choose secure boot and then choose secure boot control.
- Choose active by indication.
- Squeeze F10 or any other key (shown on the right pane) to save your BIOS settings.
- Your PC should reboot.
Secure Boot should now be enabled.
What to do if Secure Boot won’t turn on?
If Secure Boot refuses to power back on despite removing incompatible items from your PC, you may need to reset your PC.
Resetting your PC will remove all your files as well as any custom settings. If you want to keep some files, back them up on an external drive or in the cloud.
Then, follow these steps to reset your PC:
- open to Adjustment pressing the app windows + I keys at the same time.
- In Adjustment, Choose Updates and Security on the bottom.
- From the sidebar on the left, select health benefit.
- On the right pane, under reset this pc section, select get started Button.
- In the window that opens, select remove all.
- Your PC should start resetting.
Once your PC is reset, follow the procedure above to re-activate Secure Boot on your PC.
We hope that this guide helped you to disable Secure Boot on your Windows 10 PC. Tell us what you did to turn this feature off in the comments below.