How to Configure Remote Desktop Through Router:
If you want to connect to your Windows PC from a remote location, there are several ways to do it. For example, you could Tunnel VNC over SSHAllows you to use the open-source VNC protocol over an encrypted SSH connection. However, the best method is to use the Windows Remote Desktop tool.
There are a few steps you must take before you are ready to remotely connect to a Windows PC. You must configure the remote desktop through your router, ensuring that the required ports are open and that port forwarding is active. To do this and Use remote desktop From a distance, you have to follow these steps.
Configuring Windows Firewall to Allow Remote Desktop Access
Before you can configure a remote desktop connection through your router, you will need to make sure that Windows will allow ingoing and outgoing connections to your PC.
- To do this, right-click on the Start menu and select Adjustment.
- In Adjustment Menu, select Update and security > Windows security > Firewall and network security.
- In Firewall and network security Menu, select Allow an application through firewall the option.
- Choose change settings Button in Approved Apps Window to unlock the menu.
- Once you open this menu, search remote Desktop And Remote Desktop (WebSocket) Options in the list provided. Select the checkbox next to these options to allow RDP connections through the firewall. Choose Okay Button to save your choice.
Changing the default RDP port on Windows 10
You have installed Windows Firewall to allow RDP (Remote Desktop Protocol) connection. Now, you should change the default RDP port used by Windows for RDP connections Port 3389 For an optional port number.
this is due to Remote desktop protocol attacks threat Is too much. While changing ports is not the only way to secure your RDP connection, it will help slow and limit risks with random, port scanning bots searching for open RDP ports on your router.
- To change the RDP port, right-click on the Start menu and select Daud the option. Alternatively, select Windows key + r On your keyboard.
- In Daud Dialog box, type regedit Before selection Okay. This will open the Windows Registry Editor.
- In the new Registry Editor window, using the tree menu on the left, search HKEY_LOCAL_MACHINE System CurrentControlSet Control Terminal Server WinStations RDP-Tcp PortNumber Key. Right click port number Select the key on the right then Revised the option.
- In Edit DWORD (32-bit) Value Box, select Decimal From base Set a new port value in the range, then value data Box, ensuring that the value you use is not typically used by any other known port. Choose Okay To save your choice.
Once you make changes to the default RDP port number, you will have to restart your PC. Any connection you make to your PC using RDP will have to be configured using the port number you select. 10.0.0.10:1337 Instead 10.0.0.10:3389) Belongs to.
Enable port forwarding on your network router
Now you can start configuring your router to allow a connection from your PC to the Internet on your local network. The first step in this process is Enable port forwarding On your router Without hackers going in.
- To get started, access your router’s web administration page using your web browser (usually) 192.168.1.1, 192.168.1.254Or a similar variation) and sign. You will need to ensure that the device you are using to access the web portal is connected to the same network. If you are unsure, consult the user manual for your network router for additional information.
- After signing in to your router, you will need the port forwarding setting (e.g. Forwarding > Virtual Servers On TP-Link routers). Once you see these settings, you’ll need to enter the RDP port (3389 by default, or a custom port you set) map to your PC’s local network IP address.
With the RDP port mapped, port forwarding must be activated and ready to allow remote desktop connections over the Internet. You should be able to connect to your PC remotely using your public IP address and RDP port number along with forwarding requests from your PC.
Mapping your IP address using a dynamic DNS service
Once port forwarding is activated, you should be able to make a remote desktop connection to the Internet, as long as the port forwarding rule is active, your PC is on and connected to your router, your Internet connection is active, and your Public ip address Remains the same.
However, if your ISP uses a dynamic IP address (the IP address that changes regularly), you may or may not change your public IP address. To solve this problem, you can map your IP address Using Dynamic DNS Service So that, even when your IP address changes, you can still make a connection remotely.
However, you can use dynamic DNS service, however, you will need to set up an account with a suitable provider no IP.
- If you want to use No-IP for dynamic DNS, Create your account By providing your email address and a suitable password. You must also provide a hostname (eg. Example.ddns.net) that you can use to establish an RDP connection without using your IP address.
- Once you create your account, you will need to activate it. Check your email inbox and choose Confirm account Receive the button after including it in the confirmation email.
- With your account activated, you will need to install Dynamic update client Next to your PC. This ensures that your No IP account always has your correct public IP address, so that you can make a connection. Download dynamic update client For your PC and install it to proceed.
- Once the Dynamic Update Client is installed on your PC, the app should open automatically. At this point use your No IP username and password.
- After signing in, you must select the hostname to link to your public IP address. Choose the appropriate hostname from the list, then select Save to confirm.
- At this point, you should be able to connect to your PC remotely using your dynamic DNS hostname and the RDP port in use (e.g. example.ddns.net:3389) Belongs to. Dynamic update client will check your public IP address change every five minutes, but if you want to refresh it yourself, select refresh now Button in the DUC Settings window.
- Some network routers (such as TP-Link) support dynamic DNS and allow you to automatically refresh your public IP address without installing a dynamic update client on your PC. However, it is recommended that you still do this as a backup option. For example, users with TP-Link routers can access these settings by choosing Dynamic DNS Menu option on the web administration page. For other models, consult your network router’s user manual for more information on how to proceed.
- Once you configure your router using these steps, you should be able to connect remotely using RDP. Be sure to type the correct dynamic DNS hostname and port number (e.g. example.ddns.net:3387) In the Remote Desktop Connection tool to authenticate correctly. If your router is configured properly and there are no other connection issues, you should be able to make the connection and successfully establish the remote desktop connection.
Options for remote desktop
The above steps should allow you to configure a remote desktop connection through your router. However, if your remote desktop connection is not working, or you are unhappy with the quality, then Options for RDP available. For example, apps like TeamViewer will allow you to easily connect to your PC.
You can also use different Remote desktop management tool To maintain your connection, or you can think Setting up a vpn To establish a connection to your remote PC instead. You might also want to consider How to remotely shutdown or restart your PC To reset your PC if you run into problems.